This European Standard was approved by CEN on 16 April 2004. Supersedes ENV 1993-1-1:1992. 137p. This part of EN 1993 gives design methods for the design of joints subject to predominantly static loading using steel grades S235, S275, S355 and S460.
Чтобы скачать этот файл зарегистрируйтесь и/или войдите на сайт используя форму сверху.
This European Standard was approved by CEN on 16 April 2004. Supersedes ENV 1993-1-1:1992. 91p. Eurocode 3 applies to the design of buildings and civil engineering works in steel. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.
This European Standard was approved by CEN on 20 June 2003. Supersedes ENV 1993-1-1: 1992. Incorporating Corrigenda December 2005 and March 2009. 19 p. This part of EN 1993 contains design guidance for the selection of steel for fracture toughness and for through thickness properties of welded elements where there is a significant risk of lamellar tearing during fabrication
This European Standard was approved by CEN on 13 January 2006. Supersedes ENV 1993-2:1997. Incorporating corrigendum April 2009. 37 p. EN1993-1 11 gives design rules for structures with tension components made of steel, which, due to their connections with the structure, are adjustable and replaceable see Table 1.1. This standard also gives rules for determining the technical...
This European Standard was approved by CEN on 6 July 2006. Incorporating corrigendum April 2009. 11 p. This standard gives alternative procedures, values and recommendations with notes indicating where national choices may have to be made. Therefore the National Standard implementing EN 1993-1-12 should have a National annex containing all Nationally Determined Parameters to be...
This European Standard was approved by CEN on 9 January 2006. Supersedes ENV 1993-1-4:1996. 37 p. This Part 1.4 of EN 1993 gives supplementary provisions for the design of buildings and civil engineering works that extend and modify the application of EN 1993-1 1, EN 1993-] EN J 993-1-5 and EN 1993-1-8 to austenitic, austenitic-ferritic and ferritic stainless steels.
This European Standard was approved by CEN on 23 April 2004. Supersedes ENV 1993-1-1:1992. Incorporating corrigenda December 2005 and April 2009. 37 p. This part of EN 1993 gives methods for the assessment of joints subjected to fatigue loading. These methods are derived from fatigue tests with large scale specimens, that include effects of geometrical and structural imperfections...
