Зарегистрироваться
Восстановить пароль
FAQ по входу

Flick Ernest W. Plastics Additives. An industrial guide. Vol. 2

  • Файл формата pdf
  • размером 7,14 МБ
  • Добавлен пользователем
  • Описание отредактировано
Flick Ernest W. Plastics Additives. An industrial guide. Vol. 2
3rd ed, Noyes Publications I William Andrew Publishing, LLC, 2002. – 236 p.
The Third Edition of this useful book is divided into three volumes. Volume 2 describes almost 1,400 plastics additives which are currently available to industry. It is the result of information received from 74 industrial companies and other organizations. The data represents selections from manufacturers’ descriptions made at no cost to, nor influence from, the makers or distributors of these materials. Only the most recent information has been included. It is believed that all of the products listed here are currently available, which will be of utmost interest to readers concerned with product discontinuances.
Impact Modifiers
Initiators
Lubricants
Micas
Pigments, Colorants, and Dyes
Plasticizers and Esters
Processing Aids
Release Agents
Silanes, Titanates, and Zirconates
Slip and Anti-Blocking Agents
  • Чтобы скачать этот файл зарегистрируйтесь и/или войдите на сайт используя форму сверху.
  • Регистрация

Смотри также

Подробнее

Fink J.K., A Concise Introduction to Additives for Thermoplastic Polymers (Добавки к термопластичным полимерам. Краткое введение)

  • pdf
Wiley-Scrivener, 2009. – 282 p. This reference focuses on additives for thermoplastic polymers and describes 21 of the most important and commonly used additives from Plasticizers and Fillers to Optical Brighteners and Anti-Microbial additives. It also includes chapters on safety and hazards, and prediction of service time models. Written in an accessible and practical style, A...
  • 2,49 МБ
  • дата добавления неизвестна
  • описание отредактировано
Подробнее

Flick Ernest W. Plastics Additives. An industrial guide. Vol. 1

  • pdf
3rd ed, Noyes Publications I William Andrew Publishing, LLC, 2001. – 313 p. The Third Edition of this useful book is divided into three volumes. Volume I describes almost 1,000 plastics additives which are currently available to industry. It is the result of information received from 76 industrial companies and other organizations. The data represents selections from...
  • 7,82 МБ
  • добавлен
  • описание отредактировано
Подробнее

Flick Ernest W. Plastics Additives. An industrial guide. Vol. 3

  • pdf
3rd ed, Noyes Publications I William Andrew Publishing, LLC, 2002. – 161 p. Stabilizers Stearates UV Absorbers Viscosity Regulators Waxes Miscellaneous and Multipurpose Compounds
  • 747,05 КБ
  • добавлен
  • описание отредактировано
Подробнее

Murphy J. Additives for Plastics Handbook

  • pdf
The Boulevard, 2001 (2 Edition), Elsevier Science, 507 p. Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems...
  • 20,98 МБ
  • добавлен
  • описание отредактировано
Подробнее

Кац Г.С., Милевски Д.В. (ред.). Наполнители для полимерных композиционных материалов

  • pdf
Справочное пособие: пер. с англ. - М. : Химия, 1981. - 736 с. : граф., рис., табл. Настоящая книга призвана ориентировать читателя в выборе типа и оптимального количества наполнителя и снабдить его информацией об основных характеристиках наполнителей. В этой книге впервые достаточно глубоко рассмотрены теоретические основы выбора минеральных наполнителей для полимеров и...
  • 26,28 МБ
  • дата добавления неизвестна
  • описание отредактировано
Наверх