Standards Australia, 2001. — 123 p. The Guidelines provide a generic framework for managing risk in the health sector. They provide a reference point for boards of management, senior executives with clinical and corporate governance responsibilities, together with risk management and clinical staff. These guidelines are based on AS/NZS 4360:1999 Risk management.
Standards Australia, 2008. — 17 p. The purpose of this document is to define a Service and assist in the development of a standard approach towards identifying and specifying Services that support messaging in healthcare.
Standards Australia International, 2001. — 71 p. This International Standard specifies requirements for a quality management system where an organization (a) needs to demonstrate its ability to consistently provide product that meet customer and applicable regulatory requirements, and (b) aims to enhance customer satisfaction through the effective application of the system,...
Standards Australia/Standards New Zealand, 2004. — 60 p. This Standard specifies procedures required to develop equipment management programs for medical devices. These include procedures for procurement, acceptance, fault management, routine testing and disposal of medical devices.
Pharmacy Guild of Australia, 2011. — 19 p. This Standard provides guidance for the design and implementation of a pharmacy quality management system. A structured management system will support the provision of consistent and high quality pharmacy health services that in turn will contribute to positive health outcomes for all Australians.
Standards Australia, Standards New Zealand, 1999. — 63 p. This Standard details the process of life cycle costing and is intended for use by both customers (users) and suppliers of products. Following the process will give a dollar value representing the life cycle cost (LCC) of a product to satisfy an identified need, together with supporting and qualifying documentation. This...
Standards Australia/Standards New Zealand. — 2009. — ISBN 0 7337 9000 3. Перевод на русский язык. Настоящий стандарт был разработан для того, чтобы помочь (правильно) выбрать, применять, и проводить техническое обслуживание подходящих СИЗОД для защиты организма (работника) от недостатка кислорода; от пыли, дыма, тумана; от газов и паров; от микроорганизмов; и от сочетания...
Standards Australia International, 2001. — 80 p. This Handbook is intended for readers who have some sort of occupational health and safety management system (OHSMS) in place already but who wish to develop and improve it so they can claim conformance with AS 4801—2000, Occupational health and safety management systems—Specification and guidance for use. Certification is...
Standards Australia International, 2004. — 75 p. This Handbook presents an integrated framework of principles, practices and criteria for implementing best practice in OHS risk management. It provides practical guidance on how to apply the risk management process set out in AS/NZS 4360:2004, Risk management to manage occupational health and safety risks.
Standards Association of Australia, 1986. — 43 p. This standard sets out recommendations aimed at promoting the health, safety and well-being of persons in the workplace.
Standards Australia/Standards New Zealand, 2001. — 41 p. This Standard specifies requirements for an occupational health and safety management system (OHSMS), to enable an organization to formulate a policy and objectives taking into account legislative requirements and information about hazards or risks. It applies to those hazards or risks over which the organization may...
Joint Standards Australia/Standards New Zealand Committee, 2018. — 610 p. (Known as the Australian/New Zealand Wiring Rules). This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EL-001, Wiring Rules, to supersede AS/NZS 3000:2007, Electrical installations (known as the Australian/ New Zealand Wiring Rules). The development of this edition...
Joint Standards Australia/Standards New Zealand Committee, 2017. — 148 p. This Standard was prepared by the Joint Standards Australia / Standards New Zealand Committee EL-001, Wiring Rules, to supersede AS/NZS 3008.1.1:2009, Electrical installations—Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV—Typical Australian installation...
Australian Standard, 2005. — 57 p. This Standard was prepared by the Australian members of Joint Standards Australia/Standards New Zealand Committee ME-001, Pressure Equipment to supersede AS 4343-1999.
Australian Standard, 2003. — 33 p. This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committees PL-006, Polyolefin Pipe Systems, to supersede AS 4130—2001, Polyethylene (PE) pipes for pressure applications, which is withdrawn. The objective of this document is to provide a standard specification for manufacturers and purchasers of polyethylene...
Australian Standard, 1999. — 83 p. This Standard sets out requirements for non-destructive examination (NDE) and testing of pressure equipment as specified in AS 1210, AS 1228, AS/NZS 3509, AS/NZS 3788, AS 4041 and AS 4458. It also specifies requirements for testing and qualification of non-destructive examination personnel.
Australian Standard, 2002. — 52 p. This Standard was prepared by the Australian members of the Joint Standards Australia/Standards New Zealand Committee ME-001, Pressure Equipment to supersede AS 2971—1987, Serially produced pressure vessels. After consultation with stakeholders in both countries, Standards Australia and Standards New Zealand decided to develop this Standard as...
Australian Standard, 1990. — 37 p. This Standard specifies inlet and outlet connection threads, material, testing, valve spindle di mensions and operati ons, and marking requirements, for compressed gas cylinder valves with threaded outlet connections for a nominated range of gases. It also specifies dimensional details of the outlet connecting parts.
Australian Standard, 1983. — 13 p. This edition of this standard was prepared by a subcommittee of the Association s Committee on Iron and Steel to supersede AS 1450-1974. It applies to carbon steel and carbon-manganese steel tubes of round, square, rectangular, or other non-circular cross-section made by various processes and intended for use in mechanical applications.
Australian Standard, 1994. — 42 p. This Standard was prepared by the Standards Australia Committee on Industrial Warning Signs to supersede AS 1319—1983. The two principal reasons for revising the Standard at this time are firstly to incorporate six new symbolic signs into the Standard, and secondly to alter the basic designs of signs with text messages to incorporate the...
Australian Standard, 1997. — 344 p. This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/1 on Pressure Equipment to supersede AS 1210—1989, Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code). This Standard is a ‘Primary Applicable Standard’ referenced in AS/NZS 1200 which is the main Standard for pressure...
Australian Standard, 2000. — 35 p. This Standard sets out guiding principles and recommended practices for the cleaning and sanitizing of dairy factory equipment. It applies to all dairy factory cleaning operations where the equipment is cleaned by the use of circulating liquids, physically scrubbed bymanual exertion or where mechanized cleaning is employed. This Standard is...
Australian Standard, 2009. — 52 p. This Standard specifies technical safety requirements and measures for hydraulic presses that are intended to work cold metal or material partly of cold metal. In operations involving hot working and the use of tongs during the machine cycle, the principles given in AS 4024.1 should be considered, but may not be capable of being fully applied....
Australian Standard, 2009. — 64 p. This Standard specifies technical safety requirements and measures for the design, manufacture and supply of mechanical presses that are ntended to work cold metal or material partly of cold metal. In operations involving hot working and the use of tongs during the machine cycle, the principles given in AS 4024.1 (series) should be considered,...
Australian/New Zealand Standard Structural design actions Part 2: Wind actions Originated in Australia as part of AS CA 1-1933. Originated in New Zealand as part of NZS 1900:1964. Previous Australian edition AS 1170.2-1989. Previous New Zealand edition NZS 4203: 1992. AS 1170.2-1989 and NZS 4203:1992 jointly revised. amalgamated and redesignated in part as AS/NZS 1170.2:2002....
Standards Australia, 2005. — ISBN: 0-7337-6930-6. Австралийский стандарт - руководство по управлению знаниями, в котором предлагается рассматривать организацию как экосистему знаний, а изменения экосистемы как отдельные интервенции. Приводится методика анализа зрелости элементов экосистемы, а также стадии интервенций и обзор средств реализации. На русский язык пока официально...
Australian/New Zealand Standard. Originated in Australia as part of AS 2063-1977. Originated in New Zealand as NZS 5439:1986. Previous edition AS/NZS 2063: 1996. Second edition 2008. Reissued incorporating Amendment No.1 (December 2009). 22 p. This Standard specifies construction requirements and the basic performance requirements for impact energy attenuation, helmet stability,...
Комментарии