The 2010 edition of the National Building Code of Canada (NBC) is now available. Over 800 technical changes have been incorporated in this new edition. The NBC sets out technical provisions for the design and construction of new buildings. It also applies to the alteration, change of use and demolition of existing buildings.
New information has been added to make the NBC 2010...
The 2010 edition of the National Building Code of Canada (NBC) is now available. Over 800 technical changes have been incorporated in this new edition. The NBC sets out technical provisions for the design and construction of new buildings. It also applies to the alteration, change of use and demolition of existing buildings. New information has been added to make the NBC 2010...
Canadian Standards Association, 2004. - 232 p. ISBN: 1-55397-559-6 Scope Reference publications, definitions, symbols, and standard notation and calculations Materials Concrete quality, mixing, and placement Drawings and related documents Formwork, falsework, embedded pipes, and construction joints Details of reinforcement Design — Limit states, load combinations, and material...
Canadian Standards Association, 2001 (cover, title page, and copyright page updated 2003). - 162 p. ISBN: 1-55324-808-2 Scope and Application Definitions and Symbols Reference Publications 10 Structural Documents Material: Standards and Identification 15 Design Requirements Loads and Safety Criterion Analysis of Structure Stability of Structures and Members Design Lengths and...
Standards Council of Canada, 2011. — 64 p. This standard specifies requirements for an occupational health and safety management system. This standard is applicable to an organization of any size or type. This standard is intended to address occupational health and safety. It is not intended to address product and services safety.
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This Fourth Edition National Standard of Canada is based on, and now supersedes, the Third Edition ULC-S615-2000. Approved by October 2014. 68 p. Except as described in Clause 1.7, these minimum requirements cover single and double wall cylindrical steel, non-pressure tanks...
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This Third Edition National Standard of Canada is based on, and now supersedes, the Second Edition ULC-S615-1998. Approved by October 2014. 38 p. This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are...
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This First Edition. Approved by October 2014. 36 p. This Standard provides minimum requirements for nonmetallic internal retrofit systems intended for field installation in underground tanks for the storage of flammable and combustible liquids, such as: A. Petroleum...
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This First Edition. Approved by October 2014. 28 p. This Standard provides minimum requirements for primary containment leak detection that uses quantitative assessment of physical characteristics to detect leaks in the primary containment. These requirements do not cover...
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This First Edition. Approved by October 2014. 28 p. This Standard provides minimum requirements for primary containment leak detection that uses qualitative characteristics to detect leaks in the primary containment. Nonvolumetric leak detection devices may be categorized,...
National Standard of Canada. The Standards Council of Canada. Underwriters Laboratories of Canada (ULC). This First Edition. Approved by October 2014. 28 p. This Standard covers minimum requirements for shop fabricated, aboveground fire tested tank assemblies intended for storage of flammable and combustible liquids that have a specific gravity not greater than 1.0 and that are...
11th edition. — Canadian Institute of Steel Construction, 2017. — 1193 p. — ISBN 978-0-88811-207-1. The Handbook of Steel Construction contains the CSA S16-14 Standard, the CISC Commentary on CSA S16-14, design tables (connections, columns, beams, properties and dimensions), and the CISC Code of Standard Practice. The 11th Edition has been updated to reflect changes to S16-14...
ISBN: 0-660-19535-6 Cat. no.: NH17-3/2005 Wood-frame houses—Canada—Design and construction. Wood-frame buildings—Canada—Design and construction. House construction—Canada. I. Canada Mortgage and Housing Corporation II. Title. TH4818.W6B87 2005 694 C2005-980262-6 Canadian Wood-Frame House Construction by Canada Mortgage and Housing Corporation (CMHC) has been a popular...
ISBN: 978-0-660-19848-4 Cat. no.: NH15-436/2008E Stoves, Wood--Handbooks, manuals, etc. Stoves, Wood--Safety measures. Dwellings--Heating and ventilation--Canada. Fuelwood. Fireplaces. I. Canada Mortgage and Housing Corporation. If you heat with wood now or are considering the use of wood fuel for home heating, this book is for you.Wood as a home energy source differs in...
This is the fourteenth edition of CSA B149.1, Natural gas and propane installation code. It supersedes the previous editions, published in 2005 and 2000 by the Canadian Standards Association (CSA) as CAN/CSA-B149.1, The CSA B149 Installation Code Committee, which is responsible for preparing this Code, consists of members of the provincial gas inspection authorities, natural gas...
This is the tenth edition of CSA B149.2, Propane storage and handling code. It supersedes the previous editions, published in 2005 and 2000 by the Canadian Standards Association (CSA) as CAN/CSA-B149.2, in 1995, 1991, 1986, 1980, 1978, and 1976 by the Canadian Gas Association (CGA), and in 1969 by the Canadian Standards Association. The CSA B149 Installation Code Committee, which...
Canadian Standards Association, Mississauga, Ontario, Canada, 2009, 175 pages, ISBN: 978-1-55491-224-7 This is the seventh edition of CSA S16, Design of steel structures. It supersedes the previous limit states editions published in 2001, 1994, 1989, 1984, 1 978, and 1974. These seven limit states design editions were preceded by seven working stress design editions published...
Canadian Standard Organization, 2012. — 74 p. This standard specifies program requirements for the identification and elimination of occupational health and safety hazards and for assessment and control of risks associated with remaining hazards that cannot be eliminated.
Published in June 2015 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials 19 Executive Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials 25 Subcommittee on Aluminum Pipeline Systems 27 Subcommittee...
CSA Group, 2019. Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials Executive Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials Subcommittee on Aluminum Pipeline Systems Subcommittee on Coatings Subcommittee on Construction Subcommittee on Design Subcommittee on Distribution Editorial Subcommittee Subcommittee...
Standards Council of Canada, 2019. Containers: B51-19, Part 1 Boilers, Pressure Vessels, and Pressure Piping B51-19, Part 2 High Pressure Cylinders for the On-board Storage of Natural Gas as a Fuel for Automotive Vehicles B51-19, Part 3 Compressed Natural Gas Refuelling Station Pressure Piping Systems and Ground Storage Vessels
B51-03 Boiler, Pressure Vessel, and Pressure Piping Code Сontains: B51-03, Part 1 Boilers, Pressure Vessels, and Pressure Piping B51-03, Part 2 High Pressure Cylinders for the On-board Storage of Natural Gas as a Fuel for Automotive Vehicles B51-03, Part 3 Compressed Natural Gas Refuelling Station Pressure Piping Systems and Ground Storage Vessels Also Includes the Supplement...
Ontario Building Code 2012 containing the Building Code Act, 1992, and O. Reg. 332/12 in effect January 1, 2014. The Ontario Building Code 2012 is over 750 pages of Code information to ensure that Code compliance stays within your budget. It contains the core of the objective-based Code: the Building Code Act, 1992 and Ontario Regulation 332/12. Division A - Compliance,...
Комментарии